歡迎來到北京中航時代儀器設備有限公司網站！
咨詢電話：13699145010
產品分類
Product Category詳細介紹
氧指數測定儀說明：
JF-3型氧指數測定儀符合塑料燃燒性能試驗方法氧指數法GB/T2406和紡織品燃燒性能試驗氧指數法GB/T5454等標準國家標準，用于評定聚合物在規定試驗條件下的燃燒性能，即測定聚合物剛好維持燃燒的zui低氧的體積百分比濃度。適用于塑料、橡膠、纖維、泡沫塑料、膠卷、薄膜和紡織及木材等材料的燃燒性能測定。
該是一種測定聚合物燃燒性準確、重現性好、方便快捷的檢測儀器。本儀器采用數顯式儀表測定操作簡單，不僅可以作為鑒定聚合物難燃性的手段，還可以作為一種研究工具。
試驗參數：
測量范圍：0—100%、O2
測量精度：±0.2%/ O2
響應時間：<10S
數顯精度：0.1
儀器的工作條件
環境溫度：10-35℃
相對濕度：45%-75%
供電電壓：DC9V
使用氣體：GB3863工業用氣態氧；
GB3864工業用氣態氮；
輸入壓力：0.25Mpa;
工作壓力：0.1Mpa。
The determination of oxygen index instrument:
JF-3 oxygen index tester meets plastics test method for the oxygen index method and GB/T2406textile national standard test oxygen performance index method GB/T5454 standard forcombustion, combustion performance under stipulated test condition evaluation of polymers,namely the determination of polymer just to maintain the oxygen volume percentage concentration of combustion. Determination of combustion performance is suitable for plastic,rubber, fiber, foam, film, film and textile and wood materials such as.
The oxygen index measuring instrument is a kind of determination of polymer burning accurate,reproducible detection instrument is good, convenient and quick. The instrument of determination of simple operation using digital instrument, not only can be used as identification of polymer flame retardant means, but also can be used as a research tool.
Apparatus test parameters of oxygen index determination:
Measuring range: 0 - 100%, O2
Measuring accuracy: + 0.2%/ O2
Response time: <10S
Digital accuracy: 0.1
The instrument working conditions
The environment temperature: 10-35 degrees
Relative humidity: 45%-75%
Power supply voltage: DC9V
The use of gas: gaseous oxygen for GB3863 industry;
Gaseous nitrogen is applied in GB3864 industry;
The input pressure: 0.25Mpa;
Working pressure: 0.1Mpa.
產品咨詢
電話
微信掃一掃
聯系人：石磊
地址：北京市房山區經濟技術開發區1號
郵箱：zhsdyq@163.com
傳真：86-010-80224846